LEDMotion Stand Alone Remote and IR Receiver

The LEDMotion Stand Alone DMX Remote and IR Receiver has been created as a simple remote control option for use with the LEDMotion Stand Alone 512 or 1024 and SlimDMX Controllers.

The compact and simple design of the IR Receiver makes placement possible in almost any dry location. Place the Stand Alone DMX Controller with the lights, then mount the IR Receiver in a convenient or hidden place, such as the other side of the room (up to 100 feet away from controller).

The IR Receiver works with the following DMX Controllers:

• LEDMotion Stand Alone 512 (uses a network/patch cable - not included)
• SlimDMX Stand Alone 512 (uses three wires)

The IR Receiver also requires no extra power supply or transformer to function, as the required 5V DC power comes from the connection to the DMX controller.

Warning: When using with the LEDMotion Stand Alone 512 or 1024, a network or patch cable up to 100 feet long, is required.

On the remote, select up to 10 different scenes with the ability to pause them, activate a blackout, or speed up or slow down the program at anytime.

The brightness levels can also be changed and includes a built in white activation when the brightest levels are chosen (brightness levels 1-9 change the brightness of the program, 10-19 activates the white channel to bright workable light).

The LEDMotion Stand Alone Remote is an IR remote (battery included) and must be pointed at the included sensor in order to work.

Main Features:

Remote:

• Lightweight Matte Black Design
• On/Off Button
• 10 Separate Scene Buttons
• Pause Button
• Speed Buttons
• Brightness Buttons
• Uses Standard CR2025 Battery
• Battery Included
• 15 foot Wireless Range
• IR Remote Control

IR Receiver:

• 1 wire connection on LEDMotion Stand Alone 512 or 1024 (using RJ45 connection port)
• 4 wire connection on SlimDMX Stand Alone 512 (using screw down wiring terminals)
• IR detector
• Mounting Holes